79 lines
2.0 KiB
ReStructuredText
79 lines
2.0 KiB
ReStructuredText
|
.. SPDX-License-Identifier: GPL-2.0-or-later
|
|||
|
|
|
|||
|
|
Kernel driver gpd-fan
|
|||
|
|
=========================
|
|||
|
|
|
|||
|
|
Author:
|
|||
|
|
- Cryolitia PukNgae <cryolitia@uniontech.com>
|
|||
|
|
|
|||
|
|
Description
|
|||
|
|
------------
|
|||
|
|
|
|||
|
|
Handheld devices from Shenzhen GPD Technology Co., Ltd. provide fan readings
|
|||
|
|
and fan control through their embedded controllers.
|
|||
|
|
|
|||
|
|
Supported devices
|
|||
|
|
-----------------
|
|||
|
|
|
|||
|
|
Currently the driver supports the following handhelds:
|
|||
|
|
|
|||
|
|
- GPD Win Mini (7840U)
|
|||
|
|
- GPD Win Mini (8840U)
|
|||
|
|
- GPD Win Mini (HX370)
|
|||
|
|
- GPD Pocket 4
|
|||
|
|
- GPD Duo
|
|||
|
|
- GPD Win Max 2 (6800U)
|
|||
|
|
- GPD Win Max 2 2023 (7840U)
|
|||
|
|
- GPD Win Max 2 2024 (8840U)
|
|||
|
|
- GPD Win Max 2 2025 (HX370)
|
|||
|
|
- GPD Win 4 (6800U)
|
|||
|
|
- GPD Win 4 (7840U)
|
|||
|
|
|
|||
|
|
Module parameters
|
|||
|
|
-----------------
|
|||
|
|
|
|||
|
|
gpd_fan_board
|
|||
|
|
Force specific which module quirk should be used.
|
|||
|
|
Use it like "gpd_fan_board=wm2".
|
|||
|
|
|
|||
|
|
- wm2
|
|||
|
|
- GPD Win 4 (7840U)
|
|||
|
|
- GPD Win Max 2 (6800U)
|
|||
|
|
- GPD Win Max 2 2023 (7840U)
|
|||
|
|
- GPD Win Max 2 2024 (8840U)
|
|||
|
|
- GPD Win Max 2 2025 (HX370)
|
|||
|
|
- win4
|
|||
|
|
- GPD Win 4 (6800U)
|
|||
|
|
- win_mini
|
|||
|
|
- GPD Win Mini (7840U)
|
|||
|
|
- GPD Win Mini (8840U)
|
|||
|
|
- GPD Win Mini (HX370)
|
|||
|
|
- GPD Pocket 4
|
|||
|
|
- GPD Duo
|
|||
|
|
|
|||
|
|
Sysfs entries
|
|||
|
|
-------------
|
|||
|
|
|
|||
|
|
The following attributes are supported:
|
|||
|
|
|
|||
|
|
fan1_input
|
|||
|
|
Read Only. Reads current fan RPM.
|
|||
|
|
|
|||
|
|
pwm1_enable
|
|||
|
|
Read/Write. Enable manual fan control. Write "0" to disable control and run
|
|||
|
|
at full speed. Write "1" to set to manual, write "2" to let the EC control
|
|||
|
|
decide fan speed. Read this attribute to see current status.
|
|||
|
|
|
|||
|
|
NB：In consideration of the safety of the device, when setting to manual mode,
|
|||
|
|
the pwm speed will be set to the maximum value (255) by default. You can set
|
|||
|
|
a different value by writing pwm1 later.
|
|||
|
|
|
|||
|
|
pwm1
|
|||
|
|
Read/Write. Read this attribute to see current duty cycle in the range
|
|||
|
|
[0-255]. When pwm1_enable is set to "1" (manual) write any value in the
|
|||
|
|
range [0-255] to set fan speed.
|
|||
|
|
|
|||
|
|
NB: Many boards (except listed under wm2 above) don't support reading the
|
|||
|
|
current pwm value in auto mode. That will just return EOPNOTSUPP. In manual
|
|||
|
|
mode it will always return the real value.
|