jzh/Linux-6.18.2
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
master
Linux-6.18.2/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
zhji 895b9be378 [feat] fisrst commit of linux-6.18.2
2025-12-23 20:06:59 +08:00

315 lines
7.5 KiB
Plaintext
Raw Permalink Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2023 PHYTEC Messtechnik GmbH
* Author: Wadim Egorov <w.egorov@phytec.de>, Christoph Stoidner <c.stoidner@phytec.de>
* Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
*
* Product homepage:
* phyBOARD-Segin carrier board is reused for the i.MX93 design.
* https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/
*/
/dts-v1/;
#include "imx93-phycore-som.dtsi"
/{
model = "PHYTEC phyBOARD-Segin-i.MX93";
compatible = "phytec,imx93-phyboard-segin", "phytec,imx93-phycore-som",
"fsl,imx93";
aliases {
ethernet1 = &eqos;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
i2c0 = &lpi2c1;
i2c1 = &lpi2c2;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
rtc0 = &i2c_rtc;
rtc1 = &bbnsm_rtc;
serial0 = &lpuart1;
};
chosen {
stdout-path = &lpuart1;
};
flexcan1_tc: can-phy0 {
compatible = "ti,tcan1043";
#phy-cells = <0>;
max-bitrate = <1000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1_tc>;
enable-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
};
reg_sound_1v8: regulator-sound-1v8 {
compatible = "regulator-fixed";
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
regulator-name = "VCC1V8_AUDIO";
};
reg_sound_3v3: regulator-sound-3v3 {
compatible = "regulator-fixed";
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "VCC3V3_ANALOG";
};
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "VCC_SD";
};
sound: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&dailink_master>;
simple-audio-card,frame-master = <&dailink_master>;
simple-audio-card,widgets =
"Line", "Line In",
"Line", "Line Out",
"Speaker", "Speaker";
simple-audio-card,routing =
"Line Out", "LLOUT",
"Line Out", "RLOUT",
"Speaker", "SPOP",
"Speaker", "SPOM",
"LINE1L", "Line In",
"LINE1R", "Line In";
simple-audio-card,cpu {
sound-dai = <&sai1>;
};
dailink_master: simple-audio-card,codec {
sound-dai = <&audio_codec>;
clocks = <&clk IMX93_CLK_SAI1>;
};
};
};
/* Ethernet */
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
phy-mode = "rmii";
phy-handle = <&ethphy2>;
assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
<&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
assigned-clock-rates = <100000000>, <50000000>;
status = "okay";
};
&mdio {
ethphy2: ethernet-phy@2 {
compatible = "ethernet-phy-id0022.1561";
reg = <2>;
clocks = <&clk IMX93_CLK_ENET_REF_PHY>;
clock-names = "rmii-ref";
micrel,led-mode = <1>;
};
};
/* CAN */
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
phys = <&flexcan1_tc>;
status = "okay";
};
/* I2C2 */
&lpi2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpi2c2>;
status = "okay";
/* Codec */
audio_codec: audio-codec@18 {
compatible = "ti,tlv320aic3007";
reg = <0x18>;
#sound-dai-cells = <0>;
AVDD-supply = <&reg_sound_3v3>;
IOVDD-supply = <&reg_sound_3v3>;
DRVDD-supply = <&reg_sound_3v3>;
DVDD-supply = <&reg_sound_1v8>;
};
/* RTC */
i2c_rtc: rtc@68 {
compatible = "microcrystal,rv4162";
reg = <0x68>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc>;
interrupt-parent = <&gpio4>;
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
};
};
/* Console */
&lpuart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
/* Audio */
&sai1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1>;
assigned-clocks = <&clk IMX93_CLK_SAI1>;
assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
assigned-clock-rates = <19200000>;
fsl,sai-mclk-direction-output;
status = "okay";
};
/* USB */
&usbotg1 {
disable-over-current;
dr_mode = "otg";
status = "okay";
};
&usbotg2 {
disable-over-current;
dr_mode = "host";
status = "okay";
};
/* SD-Card */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
bus-width = <4>;
cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
disable-wp;
no-mmc;
no-sdio;
vmmc-supply = <&reg_usdhc2_vmmc>;
status = "okay";
};
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX93_PAD_ENET1_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK 0x4000050e
MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x50e
MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x50e
MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x50e
MX93_PAD_ENET1_RXC__ENET_QOS_RX_ER 0x57e
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e
MX93_PAD_PDM_CLK__CAN1_TX 0x139e
>;
};
pinctrl_flexcan1_tc: flexcan1tcgrp {
fsl,pins = <
MX93_PAD_ENET2_TD3__GPIO4_IO16 0x31e
>;
};
pinctrl_lpi2c2: lpi2c2grp {
fsl,pins = <
MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e
MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
>;
};
pinctrl_rtc: rtcgrp {
fsl,pins = <
MX93_PAD_ENET2_RD2__GPIO4_IO26 0x31e
>;
};
pinctrl_sai1: sai1grp {
fsl,pins = <
MX93_PAD_UART2_RXD__SAI1_MCLK 0x1202
MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x1202
MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x1202
MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x1402
MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x1402
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
MX93_PAD_UART1_TXD__LPUART1_TX 0x30e
>;
};
pinctrl_usdhc2_cd: usdhc2cdgrp {
fsl,pins = <
MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc2_default: usdhc2grp {
fsl,pins = <
MX93_PAD_SD2_CLK__USDHC2_CLK 0x159e
MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e
MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e
MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX93_PAD_SD2_CLK__USDHC2_CLK 0x159e
MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e
MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000139e
MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e
MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000139e
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000139e
MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000139e
MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
};
Reference in New Issue View Git Blame Copy Permalink