461 lines
11 KiB
C
461 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* portwell-ec.c: Portwell embedded controller driver.
|
|
*
|
|
* Tested on:
|
|
* - Portwell NANO-6064
|
|
*
|
|
* This driver supports Portwell boards with an ITE embedded controller (EC).
|
|
* The EC is accessed through I/O ports and provides:
|
|
* - Temperature and voltage readings (hwmon)
|
|
* - 8 GPIO pins for control and monitoring
|
|
* - Hardware watchdog with 1-15300 second timeout range
|
|
*
|
|
* It integrates with the Linux hwmon, GPIO and Watchdog subsystems.
|
|
*
|
|
* (C) Copyright 2025 Portwell, Inc.
|
|
* Author: Yen-Chi Huang (jesse.huang@portwell.com.tw)
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/bits.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/sizes.h>
|
|
#include <linux/string.h>
|
|
#include <linux/units.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
#define PORTWELL_EC_IOSPACE 0xe300
|
|
#define PORTWELL_EC_IOSPACE_LEN SZ_256
|
|
|
|
#define PORTWELL_GPIO_PINS 8
|
|
#define PORTWELL_GPIO_DIR_REG 0x2b
|
|
#define PORTWELL_GPIO_VAL_REG 0x2c
|
|
|
|
#define PORTWELL_HWMON_TEMP_NUM 3
|
|
#define PORTWELL_HWMON_VOLT_NUM 5
|
|
|
|
#define PORTWELL_WDT_EC_CONFIG_ADDR 0x06
|
|
#define PORTWELL_WDT_CONFIG_ENABLE 0x1
|
|
#define PORTWELL_WDT_CONFIG_DISABLE 0x0
|
|
#define PORTWELL_WDT_EC_COUNT_MIN_ADDR 0x07
|
|
#define PORTWELL_WDT_EC_COUNT_SEC_ADDR 0x08
|
|
#define PORTWELL_WDT_EC_MAX_COUNT_SECOND (255 * 60)
|
|
|
|
#define PORTWELL_EC_FW_VENDOR_ADDRESS 0x4d
|
|
#define PORTWELL_EC_FW_VENDOR_LENGTH 3
|
|
#define PORTWELL_EC_FW_VENDOR_NAME "PWG"
|
|
|
|
#define PORTWELL_EC_ADC_MAX 1023
|
|
|
|
static bool force;
|
|
module_param(force, bool, 0444);
|
|
MODULE_PARM_DESC(force, "Force loading EC driver without checking DMI boardname");
|
|
|
|
/* A sensor's metadata (label, scale, and register) */
|
|
struct pwec_sensor_prop {
|
|
const char *label;
|
|
u8 reg;
|
|
u32 scale;
|
|
};
|
|
|
|
/* Master configuration with properties for all possible sensors */
|
|
static const struct {
|
|
const struct pwec_sensor_prop temp_props[PORTWELL_HWMON_TEMP_NUM];
|
|
const struct pwec_sensor_prop in_props[PORTWELL_HWMON_VOLT_NUM];
|
|
} pwec_master_data = {
|
|
.temp_props = {
|
|
{ "CPU Temperature", 0x00, 0 },
|
|
{ "System Temperature", 0x02, 0 },
|
|
{ "Aux Temperature", 0x04, 0 },
|
|
},
|
|
.in_props = {
|
|
{ "Vcore", 0x20, 3000 },
|
|
{ "3.3V", 0x22, 6000 },
|
|
{ "5V", 0x24, 9600 },
|
|
{ "12V", 0x30, 19800 },
|
|
{ "VDIMM", 0x32, 3000 },
|
|
},
|
|
};
|
|
|
|
struct pwec_board_info {
|
|
u32 temp_mask; /* bit N = temperature channel N */
|
|
u32 in_mask; /* bit N = voltage channel N */
|
|
};
|
|
|
|
static const struct pwec_board_info pwec_board_info_default = {
|
|
.temp_mask = GENMASK(PORTWELL_HWMON_TEMP_NUM - 1, 0),
|
|
.in_mask = GENMASK(PORTWELL_HWMON_VOLT_NUM - 1, 0),
|
|
};
|
|
|
|
static const struct pwec_board_info pwec_board_info_nano = {
|
|
.temp_mask = BIT(0) | BIT(1),
|
|
.in_mask = GENMASK(4, 0),
|
|
};
|
|
|
|
static const struct dmi_system_id pwec_dmi_table[] = {
|
|
{
|
|
.ident = "NANO-6064 series",
|
|
.matches = {
|
|
DMI_MATCH(DMI_BOARD_NAME, "NANO-6064"),
|
|
},
|
|
.driver_data = (void *)&pwec_board_info_nano,
|
|
},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(dmi, pwec_dmi_table);
|
|
|
|
/* Functions for access EC via IOSPACE */
|
|
|
|
static void pwec_write(u8 index, u8 data)
|
|
{
|
|
outb(data, PORTWELL_EC_IOSPACE + index);
|
|
}
|
|
|
|
static u8 pwec_read(u8 address)
|
|
{
|
|
return inb(PORTWELL_EC_IOSPACE + address);
|
|
}
|
|
|
|
/* Ensure consistent 16-bit read across potential MSB rollover. */
|
|
static u16 pwec_read16_stable(u8 lsb_reg)
|
|
{
|
|
u8 lsb, msb, old_msb;
|
|
|
|
do {
|
|
old_msb = pwec_read(lsb_reg + 1);
|
|
lsb = pwec_read(lsb_reg);
|
|
msb = pwec_read(lsb_reg + 1);
|
|
} while (msb != old_msb);
|
|
|
|
return (msb << 8) | lsb;
|
|
}
|
|
|
|
/* GPIO functions */
|
|
|
|
static int pwec_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
return pwec_read(PORTWELL_GPIO_VAL_REG) & BIT(offset) ? 1 : 0;
|
|
}
|
|
|
|
static int pwec_gpio_set(struct gpio_chip *chip, unsigned int offset, int val)
|
|
{
|
|
u8 tmp = pwec_read(PORTWELL_GPIO_VAL_REG);
|
|
|
|
if (val)
|
|
tmp |= BIT(offset);
|
|
else
|
|
tmp &= ~BIT(offset);
|
|
pwec_write(PORTWELL_GPIO_VAL_REG, tmp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pwec_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
u8 direction = pwec_read(PORTWELL_GPIO_DIR_REG) & BIT(offset);
|
|
|
|
if (direction)
|
|
return GPIO_LINE_DIRECTION_IN;
|
|
|
|
return GPIO_LINE_DIRECTION_OUT;
|
|
}
|
|
|
|
/*
|
|
* Changing direction causes issues on some boards,
|
|
* so direction_input and direction_output are disabled for now.
|
|
*/
|
|
|
|
static int pwec_gpio_direction_input(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int pwec_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int value)
|
|
{
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static struct gpio_chip pwec_gpio_chip = {
|
|
.label = "portwell-ec-gpio",
|
|
.get_direction = pwec_gpio_get_direction,
|
|
.direction_input = pwec_gpio_direction_input,
|
|
.direction_output = pwec_gpio_direction_output,
|
|
.get = pwec_gpio_get,
|
|
.set = pwec_gpio_set,
|
|
.base = -1,
|
|
.ngpio = PORTWELL_GPIO_PINS,
|
|
};
|
|
|
|
/* Watchdog functions */
|
|
|
|
static void pwec_wdt_write_timeout(unsigned int timeout)
|
|
{
|
|
pwec_write(PORTWELL_WDT_EC_COUNT_MIN_ADDR, timeout / 60);
|
|
pwec_write(PORTWELL_WDT_EC_COUNT_SEC_ADDR, timeout % 60);
|
|
}
|
|
|
|
static int pwec_wdt_trigger(struct watchdog_device *wdd)
|
|
{
|
|
pwec_wdt_write_timeout(wdd->timeout);
|
|
pwec_write(PORTWELL_WDT_EC_CONFIG_ADDR, PORTWELL_WDT_CONFIG_ENABLE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pwec_wdt_start(struct watchdog_device *wdd)
|
|
{
|
|
return pwec_wdt_trigger(wdd);
|
|
}
|
|
|
|
static int pwec_wdt_stop(struct watchdog_device *wdd)
|
|
{
|
|
pwec_write(PORTWELL_WDT_EC_CONFIG_ADDR, PORTWELL_WDT_CONFIG_DISABLE);
|
|
return 0;
|
|
}
|
|
|
|
static int pwec_wdt_set_timeout(struct watchdog_device *wdd, unsigned int timeout)
|
|
{
|
|
wdd->timeout = timeout;
|
|
pwec_wdt_write_timeout(wdd->timeout);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Ensure consistent min/sec read in case of second rollover. */
|
|
static unsigned int pwec_wdt_get_timeleft(struct watchdog_device *wdd)
|
|
{
|
|
u8 sec, min, old_min;
|
|
|
|
do {
|
|
old_min = pwec_read(PORTWELL_WDT_EC_COUNT_MIN_ADDR);
|
|
sec = pwec_read(PORTWELL_WDT_EC_COUNT_SEC_ADDR);
|
|
min = pwec_read(PORTWELL_WDT_EC_COUNT_MIN_ADDR);
|
|
} while (min != old_min);
|
|
|
|
return min * 60 + sec;
|
|
}
|
|
|
|
static const struct watchdog_ops pwec_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = pwec_wdt_start,
|
|
.stop = pwec_wdt_stop,
|
|
.ping = pwec_wdt_trigger,
|
|
.set_timeout = pwec_wdt_set_timeout,
|
|
.get_timeleft = pwec_wdt_get_timeleft,
|
|
};
|
|
|
|
static struct watchdog_device ec_wdt_dev = {
|
|
.info = &(struct watchdog_info){
|
|
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
|
|
.identity = "Portwell EC watchdog",
|
|
},
|
|
.ops = &pwec_wdt_ops,
|
|
.timeout = 60,
|
|
.min_timeout = 1,
|
|
.max_timeout = PORTWELL_WDT_EC_MAX_COUNT_SECOND,
|
|
};
|
|
|
|
/* HWMON functions */
|
|
|
|
static umode_t pwec_hwmon_is_visible(const void *drvdata, enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
const struct pwec_board_info *info = drvdata;
|
|
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
return (info->temp_mask & BIT(channel)) ? 0444 : 0;
|
|
case hwmon_in:
|
|
return (info->in_mask & BIT(channel)) ? 0444 : 0;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int pwec_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
u16 tmp16;
|
|
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
*val = pwec_read(pwec_master_data.temp_props[channel].reg) * MILLIDEGREE_PER_DEGREE;
|
|
return 0;
|
|
case hwmon_in:
|
|
tmp16 = pwec_read16_stable(pwec_master_data.in_props[channel].reg);
|
|
*val = (tmp16 * pwec_master_data.in_props[channel].scale) / PORTWELL_EC_ADC_MAX;
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int pwec_hwmon_read_string(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, const char **str)
|
|
{
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
*str = pwec_master_data.temp_props[channel].label;
|
|
return 0;
|
|
case hwmon_in:
|
|
*str = pwec_master_data.in_props[channel].label;
|
|
return 0;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static const struct hwmon_channel_info *pwec_hwmon_info[] = {
|
|
HWMON_CHANNEL_INFO(temp,
|
|
HWMON_T_INPUT | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL),
|
|
HWMON_CHANNEL_INFO(in,
|
|
HWMON_I_INPUT | HWMON_I_LABEL,
|
|
HWMON_I_INPUT | HWMON_I_LABEL,
|
|
HWMON_I_INPUT | HWMON_I_LABEL,
|
|
HWMON_I_INPUT | HWMON_I_LABEL,
|
|
HWMON_I_INPUT | HWMON_I_LABEL),
|
|
NULL
|
|
};
|
|
|
|
static const struct hwmon_ops pwec_hwmon_ops = {
|
|
.is_visible = pwec_hwmon_is_visible,
|
|
.read = pwec_hwmon_read,
|
|
.read_string = pwec_hwmon_read_string,
|
|
};
|
|
|
|
static const struct hwmon_chip_info pwec_chip_info = {
|
|
.ops = &pwec_hwmon_ops,
|
|
.info = pwec_hwmon_info,
|
|
};
|
|
|
|
static int pwec_firmware_vendor_check(void)
|
|
{
|
|
u8 buf[PORTWELL_EC_FW_VENDOR_LENGTH + 1];
|
|
u8 i;
|
|
|
|
for (i = 0; i < PORTWELL_EC_FW_VENDOR_LENGTH; i++)
|
|
buf[i] = pwec_read(PORTWELL_EC_FW_VENDOR_ADDRESS + i);
|
|
buf[PORTWELL_EC_FW_VENDOR_LENGTH] = '\0';
|
|
|
|
return !strcmp(PORTWELL_EC_FW_VENDOR_NAME, buf) ? 0 : -ENODEV;
|
|
}
|
|
|
|
static int pwec_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *hwmon_dev;
|
|
void *drvdata = dev_get_platdata(&pdev->dev);
|
|
int ret;
|
|
|
|
if (!devm_request_region(&pdev->dev, PORTWELL_EC_IOSPACE,
|
|
PORTWELL_EC_IOSPACE_LEN, dev_name(&pdev->dev))) {
|
|
dev_err(&pdev->dev, "failed to get IO region\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
ret = pwec_firmware_vendor_check();
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = devm_gpiochip_add_data(&pdev->dev, &pwec_gpio_chip, NULL);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to register Portwell EC GPIO\n");
|
|
return ret;
|
|
}
|
|
|
|
if (IS_REACHABLE(CONFIG_HWMON)) {
|
|
hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
|
|
"portwell_ec", drvdata, &pwec_chip_info, NULL);
|
|
ret = PTR_ERR_OR_ZERO(hwmon_dev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ec_wdt_dev.parent = &pdev->dev;
|
|
return devm_watchdog_register_device(&pdev->dev, &ec_wdt_dev);
|
|
}
|
|
|
|
static int pwec_suspend(struct device *dev)
|
|
{
|
|
if (watchdog_active(&ec_wdt_dev))
|
|
return pwec_wdt_stop(&ec_wdt_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pwec_resume(struct device *dev)
|
|
{
|
|
if (watchdog_active(&ec_wdt_dev))
|
|
return pwec_wdt_start(&ec_wdt_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static DEFINE_SIMPLE_DEV_PM_OPS(pwec_dev_pm_ops, pwec_suspend, pwec_resume);
|
|
|
|
static struct platform_driver pwec_driver = {
|
|
.driver = {
|
|
.name = "portwell-ec",
|
|
.pm = pm_sleep_ptr(&pwec_dev_pm_ops),
|
|
},
|
|
.probe = pwec_probe,
|
|
};
|
|
|
|
static struct platform_device *pwec_dev;
|
|
|
|
static int __init pwec_init(void)
|
|
{
|
|
const struct dmi_system_id *match;
|
|
const struct pwec_board_info *hwmon_data;
|
|
int ret;
|
|
|
|
match = dmi_first_match(pwec_dmi_table);
|
|
if (!match) {
|
|
if (!force)
|
|
return -ENODEV;
|
|
hwmon_data = &pwec_board_info_default;
|
|
pr_warn("force load portwell-ec without DMI check, using full display config\n");
|
|
} else {
|
|
hwmon_data = match->driver_data;
|
|
}
|
|
|
|
ret = platform_driver_register(&pwec_driver);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pwec_dev = platform_device_register_data(NULL, "portwell-ec", PLATFORM_DEVID_NONE,
|
|
hwmon_data, sizeof(*hwmon_data));
|
|
if (IS_ERR(pwec_dev)) {
|
|
platform_driver_unregister(&pwec_driver);
|
|
return PTR_ERR(pwec_dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit pwec_exit(void)
|
|
{
|
|
platform_device_unregister(pwec_dev);
|
|
platform_driver_unregister(&pwec_driver);
|
|
}
|
|
|
|
module_init(pwec_init);
|
|
module_exit(pwec_exit);
|
|
|
|
MODULE_AUTHOR("Yen-Chi Huang <jesse.huang@portwell.com.tw>");
|
|
MODULE_DESCRIPTION("Portwell EC Driver");
|
|
MODULE_LICENSE("GPL");
|