112 lines
2.6 KiB
YAML
112 lines
2.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: GE B850v3 video bridge
|
|
|
|
maintainers:
|
|
- Frank Li <Frank.Li@nxp.com>
|
|
|
|
description: |
|
|
STDP4028-ge-b850v3-fw bridges (LVDS-DP)
|
|
STDP2690-ge-b850v3-fw bridges (DP-DP++)
|
|
|
|
The video processing pipeline on the second output on the GE B850v3:
|
|
|
|
Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
|
|
|
|
Each bridge has a dedicated flash containing firmware for supporting the custom
|
|
design. The result is that, in this design, neither the STDP4028 nor the
|
|
STDP2690 behave as the stock bridges would. The compatible strings include the
|
|
suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with
|
|
the firmware specific for the GE B850v3.
|
|
|
|
The hardware do not provide control over the video processing pipeline, as the
|
|
two bridges behaves as a single one. The only interfaces exposed by the
|
|
hardware are EDID, HPD, and interrupts.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- megachips,stdp4028-ge-b850v3-fw
|
|
- megachips,stdp2690-ge-b850v3-fw
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
ports:
|
|
$ref: /schemas/graph.yaml#/properties/ports
|
|
properties:
|
|
port@0:
|
|
description: sink port
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
|
|
port@1:
|
|
description: source port
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
|
|
required:
|
|
- port@0
|
|
- port@1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- ports
|
|
|
|
allOf:
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: megachips,stdp4028-ge-b850v3-fw
|
|
then:
|
|
required:
|
|
- interrupts
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
bridge@73 {
|
|
compatible = "megachips,stdp4028-ge-b850v3-fw";
|
|
reg = <0x73>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
endpoint {
|
|
remote-endpoint = <&lvds0_out>;
|
|
};
|
|
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
endpoint {
|
|
remote-endpoint = <&stdp2690_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|