97 lines
2.1 KiB
YAML
97 lines
2.1 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/gpio/spacemit,k1-gpio.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: SpacemiT K1 GPIO controller
|
|
|
|
maintainers:
|
|
- Yixun Lan <dlan@gentoo.org>
|
|
|
|
description:
|
|
The controller's registers are organized as sets of eight 32-bit
|
|
registers with each set of port controlling 32 pins. A single
|
|
interrupt line is shared for all of the pins by the controller.
|
|
|
|
properties:
|
|
$nodename:
|
|
pattern: "^gpio@[0-9a-f]+$"
|
|
|
|
compatible:
|
|
const: spacemit,k1-gpio
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
items:
|
|
- description: GPIO Core Clock
|
|
- description: GPIO Bus Clock
|
|
|
|
clock-names:
|
|
items:
|
|
- const: core
|
|
- const: bus
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
gpio-controller: true
|
|
|
|
"#gpio-cells":
|
|
const: 3
|
|
description:
|
|
The first two cells are the GPIO bank index and offset inside the bank,
|
|
the third cell should specify GPIO flag.
|
|
|
|
gpio-ranges: true
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
|
|
"#interrupt-cells":
|
|
const: 3
|
|
description:
|
|
The first two cells are the GPIO bank index and offset inside the bank,
|
|
the third cell should specify interrupt flag. The controller does not
|
|
support level interrupts, so flags of IRQ_TYPE_LEVEL_HIGH,
|
|
IRQ_TYPE_LEVEL_LOW should not be used.
|
|
Refer <dt-bindings/interrupt-controller/irq.h> for valid flags.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- clock-names
|
|
- gpio-controller
|
|
- "#gpio-cells"
|
|
- interrupts
|
|
- interrupt-controller
|
|
- "#interrupt-cells"
|
|
- gpio-ranges
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
gpio@d4019000 {
|
|
compatible = "spacemit,k1-gpio";
|
|
reg = <0xd4019000 0x800>;
|
|
clocks = <&ccu 9>, <&ccu 61>;
|
|
clock-names = "core", "bus";
|
|
gpio-controller;
|
|
#gpio-cells = <3>;
|
|
interrupts = <58>;
|
|
interrupt-controller;
|
|
interrupt-parent = <&plic>;
|
|
#interrupt-cells = <3>;
|
|
gpio-ranges = <&pinctrl 0 0 0 32>,
|
|
<&pinctrl 1 0 32 32>,
|
|
<&pinctrl 2 0 64 32>,
|
|
<&pinctrl 3 0 96 32>;
|
|
};
|
|
...
|