101 lines
2.8 KiB
YAML
101 lines
2.8 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/iio/dac/adi,ad3530r.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Analog Devices AD3530R and Similar DACs
|
|
|
|
maintainers:
|
|
- Kim Seer Paller <kimseer.paller@analog.com>
|
|
|
|
description: |
|
|
The AD3530/AD3530R (8-channel) and AD3531/AD3531R (4-channel) are low-power,
|
|
16-bit, buffered voltage output digital-to-analog converters (DACs) with
|
|
software-programmable gain controls, providing full-scale output spans of 2.5V
|
|
or 5V for reference voltages of 2.5V. These devices operate from a single 2.7V
|
|
to 5.5V supply and are guaranteed monotonic by design. The "R" variants
|
|
include a 2.5V, 5ppm/°C internal reference, which is disabled by default.
|
|
Datasheet can be found here:
|
|
https://www.analog.com/media/en/technical-documentation/data-sheets/ad3530_ad530r.pdf
|
|
https://www.analog.com/media/en/technical-documentation/data-sheets/ad3531-ad3531r.pdf
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- adi,ad3530
|
|
- adi,ad3530r
|
|
- adi,ad3531
|
|
- adi,ad3531r
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
spi-max-frequency:
|
|
maximum: 50000000
|
|
|
|
vdd-supply:
|
|
description: Power Supply Input.
|
|
|
|
iovdd-supply:
|
|
description: Digital Power Supply Input.
|
|
|
|
io-channels:
|
|
description:
|
|
ADC channel used to monitor internal die temperature, output voltages, and
|
|
current of a selected channel via the MUXOUT pin.
|
|
maxItems: 1
|
|
|
|
ref-supply:
|
|
description:
|
|
Reference Input/Output. The voltage at the REF pin sets the full-scale
|
|
range of all channels. If not provided the internal reference is used and
|
|
also provided on the VREF pin.
|
|
|
|
reset-gpios:
|
|
description:
|
|
Active low signal that is falling edge sensitive. When it is deasserted,
|
|
the digital core initialization is performed and all DAC registers except
|
|
the Interface Configuration A register are reset to their default values.
|
|
maxItems: 1
|
|
|
|
ldac-gpios:
|
|
description:
|
|
LDAC pin to be used as a hardware trigger to update the DAC channels. If
|
|
not present, the DAC channels are updated by Software LDAC.
|
|
maxItems: 1
|
|
|
|
adi,range-double:
|
|
description:
|
|
Configure the output range for all channels. If the property is present,
|
|
the output will range from 0V to 2Vref. If the property is not present,
|
|
the output will range from 0V to Vref.
|
|
type: boolean
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- vdd-supply
|
|
- iovdd-supply
|
|
|
|
allOf:
|
|
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dac@0 {
|
|
compatible = "adi,ad3530r";
|
|
reg = <0>;
|
|
spi-max-frequency = <1000000>;
|
|
|
|
vdd-supply = <&vdd>;
|
|
iovdd-supply = <&iovdd>;
|
|
};
|
|
};
|
|
...
|