109 lines
2.4 KiB
YAML
109 lines
2.4 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/i2c/ovti,ov2735.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: OmniVision OV2735 Image Sensor
|
|
|
|
maintainers:
|
|
- Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
|
|
|
|
description:
|
|
The OmniVision OV2735 is a 2MP (1920x1080) color CMOS image sensor controlled
|
|
through an I2C-compatible SCCB bus. it outputs RAW10 format and uses a 1/2.7"
|
|
optical format.
|
|
|
|
properties:
|
|
compatible:
|
|
const: ovti,ov2735
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
items:
|
|
- description: XVCLK clock
|
|
|
|
avdd-supply:
|
|
description: Analog Domain Power Supply
|
|
|
|
dovdd-supply:
|
|
description: I/O Domain Power Supply
|
|
|
|
dvdd-supply:
|
|
description: Digital Domain Power Supply
|
|
|
|
reset-gpios:
|
|
maxItems: 1
|
|
description: Reset Pin GPIO Control (active low)
|
|
|
|
enable-gpios:
|
|
maxItems: 1
|
|
description:
|
|
Active-low enable pin. Labeled as 'PWDN' in the datasheet, but acts as
|
|
an enable signal. During power rail ramp-up, the device remains powered
|
|
down. Once power rails are stable, pulling this pin low powers on the
|
|
device.
|
|
|
|
port:
|
|
description: MIPI CSI-2 transmitter port
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
additionalProperties: false
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
data-lanes:
|
|
items:
|
|
- const: 1
|
|
- const: 2
|
|
|
|
required:
|
|
- data-lanes
|
|
- link-frequencies
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- avdd-supply
|
|
- dovdd-supply
|
|
- dvdd-supply
|
|
- port
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
camera-sensor@3c {
|
|
compatible = "ovti,ov2735";
|
|
reg = <0x3c>;
|
|
clocks = <&ov2735_clk>;
|
|
|
|
avdd-supply = <&ov2735_avdd>;
|
|
dovdd-supply = <&ov2735_dovdd>;
|
|
dvdd-supply = <&ov2735_dvdd>;
|
|
|
|
reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
|
enable-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
|
|
|
|
port {
|
|
cam_out: endpoint {
|
|
remote-endpoint = <&mipi_in_cam>;
|
|
data-lanes = <1 2>;
|
|
link-frequencies = /bits/ 64 <420000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|