80 lines
1.7 KiB
YAML
80 lines
1.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/nxp,lpc1850-scu.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: NXP LPC18xx/43xx SCU pin controller
|
|
|
|
description:
|
|
Not all pins support all pin generic node properties so either refer to
|
|
the NXP 1850/4350 user manual or the pin table in the pinctrl-lpc18xx
|
|
driver for supported pin properties.
|
|
|
|
maintainers:
|
|
- Frank Li <Frank.Li@nxp.com>
|
|
|
|
properties:
|
|
compatible:
|
|
const: nxp,lpc1850-scu
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
patternProperties:
|
|
'-pins$':
|
|
type: object
|
|
additionalProperties: false
|
|
|
|
patternProperties:
|
|
'_cfg$':
|
|
type: object
|
|
|
|
allOf:
|
|
- $ref: pincfg-node.yaml#
|
|
- $ref: pinmux-node.yaml#
|
|
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
nxp,gpio-pin-interrupt:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 7
|
|
description:
|
|
Assign pin to gpio pin interrupt controller
|
|
irq number 0 to 7. See example below.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
|
|
allOf:
|
|
- $ref: pinctrl.yaml#
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/lpc18xx-ccu.h>
|
|
|
|
pinctrl@40086000 {
|
|
compatible = "nxp,lpc1850-scu";
|
|
reg = <0x40086000 0x1000>;
|
|
clocks = <&ccu1 CLK_CPU_SCU>;
|
|
|
|
gpio-joystick-pins {
|
|
gpio-joystick-1_cfg {
|
|
pins = "p9_0";
|
|
function = "gpio";
|
|
nxp,gpio-pin-interrupt = <0>;
|
|
input-enable;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|