Linux-6.18.2/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx219.dtso
2025-12-23 20:06:59 +08:00

117 lines
1.7 KiB
Plaintext

// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
* Device Tree Overlay for an IMX219 camera sensor on connector J1 on R-Car V4H
* ES3.0 Sparrow Hawk board.
*
* Copyright 2025 Renesas Electronics Corp.
* Copyright 2025 Niklas Söderlund <niklas.soderlund@ragnatech.se>
*/
/dts-v1/;
/plugin/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/video-interfaces.h>
&{/} {
clk_cam_j1: clk-cam-j1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
/* Page 29 / CSI_IF_CN / J1 */
reg_cam_j1: reg-cam-j1 {
compatible = "regulator-fixed";
regulator-name = "cam-J1";
enable-active-high;
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
};
};
&i2c1 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
cam@10 {
compatible = "sony,imx219";
reg = <0x10>;
clocks = <&clk_cam_j1>;
VANA-supply = <&reg_cam_j1>;
VDIG-supply = <&reg_cam_j1>;
VDDL-supply = <&reg_cam_j1>;
orientation = <2>;
rotation = <0>;
port {
imx219_j1_out: endpoint {
clock-noncontinuous;
link-frequencies = /bits/ 64 <456000000>;
data-lanes = <1 2>;
remote-endpoint = <&csi40_in>;
};
};
};
};
/* Page 29 / CSI_IF_CN */
&csi40 {
status = "okay";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
csi40_in: endpoint {
bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
clock-lanes = <0>;
data-lanes = <1 2>;
remote-endpoint = <&imx219_j1_out>;
};
};
};
};
&isp0 {
status = "okay";
};
&vin00 {
status = "okay";
};
&vin01 {
status = "okay";
};
&vin02 {
status = "okay";
};
&vin03 {
status = "okay";
};
&vin04 {
status = "okay";
};
&vin05 {
status = "okay";
};
&vin06 {
status = "okay";
};
&vin07 {
status = "okay";
};