465 lines
10 KiB
Plaintext
465 lines
10 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
#include "rk3528.dtsi"
|
|
|
|
/ {
|
|
model = "ArmSoM Sige1";
|
|
compatible = "armsom,sige1", "rockchip,rk3528";
|
|
|
|
aliases {
|
|
ethernet0 = &gmac1;
|
|
i2c0 = &i2c0;
|
|
mmc0 = &sdhci;
|
|
mmc1 = &sdmmc;
|
|
mmc2 = &sdio0;
|
|
serial0 = &uart0;
|
|
serial2 = &uart2;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:1500000n8";
|
|
};
|
|
|
|
adc-keys {
|
|
compatible = "adc-keys";
|
|
io-channels = <&saradc 0>;
|
|
io-channel-names = "buttons";
|
|
keyup-threshold-microvolt = <1800000>;
|
|
poll-interval = <100>;
|
|
|
|
button-maskrom {
|
|
label = "MASKROM";
|
|
linux,code = <KEY_SETUP>;
|
|
press-threshold-microvolt = <0>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&g_led>, <&r_led>;
|
|
|
|
led-0 {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
default-state = "on";
|
|
function = LED_FUNCTION_HEARTBEAT;
|
|
gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
|
|
led-1 {
|
|
color = <LED_COLOR_ID_RED>;
|
|
default-state = "on";
|
|
function = LED_FUNCTION_STATUS;
|
|
gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
};
|
|
|
|
vcc0v6_ddr: regulator-0v6-vcc-ddr {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc0v6_ddr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <600000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vdd_0v9: regulator-0v9-vdd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_0v9";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc_ddr: regulator-1v1-vcc-ddr {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_ddr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc_1v8: regulator-1v8-vcc {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v8";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc_3v3>;
|
|
};
|
|
|
|
vcc1v8_ddr: regulator-1v8-vcc-ddr {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc1v8_ddr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc_3v3: regulator-3v3-vcc {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_3v3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc_dcin>;
|
|
};
|
|
|
|
vcc3v3_sd: regulator-3v3-vcc-sd {
|
|
compatible = "regulator-fixed";
|
|
gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc_pwren_l>;
|
|
regulator-name = "vcc3v3_sd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc_3v3>;
|
|
};
|
|
|
|
vcc5v0_sys: regulator-5v0-vcc-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc_dcin>;
|
|
};
|
|
|
|
vcc5v0_usb1_host: regulator-5v0-vcc-usb1-host {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb20_host1_drv_h>;
|
|
regulator-name = "vcc5v0_usb1_host";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc5v0_usb2_host: regulator-5v0-vcc-usb2-host {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb20_host2_drv_h>;
|
|
regulator-name = "vcc5v0_usb2_host";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb20_otg0_drv_h>;
|
|
regulator-name = "vcc5v0_usb_otg";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc_dcin: regulator-vcc-dcin {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_dcin";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vccio_sd: regulator-vccio-sd {
|
|
compatible = "regulator-gpio";
|
|
gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc_vol_ctrl_h>;
|
|
regulator-name = "vccio_sd";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
states = <1800000 0x0>, <3300000 0x1>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vdd_arm: regulator-vdd-arm {
|
|
compatible = "pwm-regulator";
|
|
pwms = <&pwm3 0 5000 PWM_POLARITY_INVERTED>;
|
|
pwm-supply = <&vcc5v0_sys>;
|
|
regulator-name = "vdd_arm";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <746000>;
|
|
regulator-max-microvolt = <1201000>;
|
|
regulator-settling-time-up-us = <250>;
|
|
};
|
|
|
|
vdd_logic: regulator-vdd-logic {
|
|
compatible = "pwm-regulator";
|
|
pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
|
|
pwm-supply = <&vcc5v0_sys>;
|
|
regulator-name = "vdd_logic";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <705000>;
|
|
regulator-max-microvolt = <1006000>;
|
|
regulator-settling-time-up-us = <250>;
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_reg_on_h>, <&clkm1_32k_out>;
|
|
post-power-on-delay-ms = <200>;
|
|
reset-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&vdd_arm>;
|
|
};
|
|
|
|
&cpu1 {
|
|
cpu-supply = <&vdd_arm>;
|
|
};
|
|
|
|
&cpu2 {
|
|
cpu-supply = <&vdd_arm>;
|
|
};
|
|
|
|
&cpu3 {
|
|
cpu-supply = <&vdd_arm>;
|
|
};
|
|
|
|
&gmac1 {
|
|
clock_in_out = "output";
|
|
phy-handle = <&rgmii_phy>;
|
|
phy-mode = "rgmii-id";
|
|
phy-supply = <&vcc_3v3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
|
|
<&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_logic>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0m0_xfer>;
|
|
status = "okay";
|
|
|
|
hym8563: rtc@51 {
|
|
compatible = "haoyu,hym8563";
|
|
reg = <0x51>;
|
|
#clock-cells = <0>;
|
|
interrupt-parent = <&gpio4>;
|
|
interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rtc_int_l>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&mdio1 {
|
|
rgmii_phy: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac1_rstn_l>;
|
|
reset-assert-us = <20000>;
|
|
reset-deassert-us = <100000>;
|
|
reset-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
bluetooth {
|
|
bt_reg_on_h: bt-reg-on-h {
|
|
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
bt_wake_host_h: bt-wake-host-h {
|
|
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
|
|
host_wake_bt_h: host-wake-bt-h {
|
|
rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
ethernet {
|
|
gmac1_rstn_l: gmac1-rstn-l {
|
|
rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
g_led: g-led {
|
|
rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
r_led: r-led {
|
|
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
rtc {
|
|
rtc_int_l: rtc-int-l {
|
|
rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
sdmmc {
|
|
sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
|
|
rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
sdmmc_pwren_l: sdmmc-pwren-l {
|
|
rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
usb20_host1_drv_h: usb20-host1-drv-h {
|
|
rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
usb20_host2_drv_h: usb20-host2-drv-h {
|
|
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
usb20_otg0_drv_h: usb20-otg0-drv-h {
|
|
rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wifi {
|
|
wifi_reg_on_h: wifi-reg-on-h {
|
|
rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
wifi_wake_host_h: wifi-wake-host-h {
|
|
rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm2m0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm3m0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&vcc_1v8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
mmc-hs200-1_8v;
|
|
no-sd;
|
|
no-sdio;
|
|
non-removable;
|
|
vmmc-supply = <&vcc_3v3>;
|
|
vqmmc-supply = <&vcc_1v8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdio0 {
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-sdio-irq;
|
|
keep-power-in-suspend;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
no-mmc;
|
|
no-sd;
|
|
non-removable;
|
|
sd-uhs-sdr104;
|
|
vmmc-supply = <&vcc_3v3>;
|
|
vqmmc-supply = <&vcc_1v8>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
wifi@1 {
|
|
compatible = "brcm,bcm4329-fmac";
|
|
reg = <1>;
|
|
clocks = <&cru CLK_DEEPSLOW>;
|
|
clock-names = "lpo";
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "host-wake";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_wake_host_h>;
|
|
};
|
|
};
|
|
|
|
&sdmmc {
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
sd-uhs-sdr104;
|
|
vmmc-supply = <&vcc3v3_sd>;
|
|
vqmmc-supply = <&vccio_sd>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0m0_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2m1_xfer>, <&uart2m1_ctsn>, <&uart2m1_rtsn>;
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "brcm,bcm43438-bt";
|
|
clocks = <&cru CLK_DEEPSLOW>;
|
|
clock-names = "lpo";
|
|
device-wakeup-gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <RK_PC2 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "host-wakeup";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bt_reg_on_h>, <&bt_wake_host_h>, <&host_wake_bt_h>;
|
|
shutdown-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
|
|
vbat-supply = <&vcc_3v3>;
|
|
vddio-supply = <&vcc_1v8>;
|
|
};
|
|
};
|