1069 lines
20 KiB
Plaintext
1069 lines
20 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/soc/rockchip,vop2.h>
|
|
#include <dt-bindings/usb/pd.h>
|
|
#include "rk3588.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
mmc0 = &sdhci;
|
|
mmc1 = &sdmmc;
|
|
mmc2 = &sdio;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial2:1500000n8";
|
|
};
|
|
|
|
hdmi0-con {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi0_con_in: endpoint {
|
|
remote-endpoint = <&hdmi0_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
hdmi1-con {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi1_con_in: endpoint {
|
|
remote-endpoint = <&hdmi1_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
fan: pwm-fan {
|
|
compatible = "pwm-fan";
|
|
cooling-levels = <0 120 150 180 210 240 255>;
|
|
fan-supply = <&vcc5v0_sys>;
|
|
pwms = <&pwm1 0 50000 0>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
rfkill-bt {
|
|
compatible = "rfkill-gpio";
|
|
label = "rfkill-m2-bt";
|
|
radio-type = "bluetooth";
|
|
shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
vbus5v0_typec: vbus5v0-typec {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vbus5v0_typec_en>;
|
|
regulator-name = "vbus5v0_typec";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
regulator-name = "vcc3v3_pcie2x1l0";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
startup-delay-us = <50000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
status = "disabled";
|
|
};
|
|
|
|
vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_pcie2x1l2";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
startup-delay-us = <5000>;
|
|
vin-supply = <&vcc_3v3_s3>;
|
|
};
|
|
|
|
vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie3_vcc3v3_en>;
|
|
regulator-name = "vcc3v3_pcie30";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
startup-delay-us = <5000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc5v0_host: regulator-vcc5v0-host {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_host";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc5v0_sys: regulator-vcc5v0-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v1_nldo_s3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
};
|
|
|
|
&combphy0_ps {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy1_ps {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy2_psu {
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu_b0 {
|
|
cpu-supply = <&vdd_cpu_big0_s0>;
|
|
};
|
|
|
|
&cpu_b1 {
|
|
cpu-supply = <&vdd_cpu_big0_s0>;
|
|
};
|
|
|
|
&cpu_b2 {
|
|
cpu-supply = <&vdd_cpu_big1_s0>;
|
|
};
|
|
|
|
&cpu_b3 {
|
|
cpu-supply = <&vdd_cpu_big1_s0>;
|
|
};
|
|
|
|
&cpu_l0 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l1 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l2 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l3 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_gpu_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi0_in {
|
|
hdmi0_in_vp0: endpoint {
|
|
remote-endpoint = <&vp0_out_hdmi0>;
|
|
};
|
|
};
|
|
|
|
&hdmi0_out {
|
|
hdmi0_out_con: endpoint {
|
|
remote-endpoint = <&hdmi0_con_in>;
|
|
};
|
|
};
|
|
|
|
&hdmi0_sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi1 {
|
|
pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd
|
|
&hdmim1_tx1_scl &hdmim1_tx1_sda>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi1_in {
|
|
hdmi1_in_vp1: endpoint {
|
|
remote-endpoint = <&vp1_out_hdmi1>;
|
|
};
|
|
};
|
|
|
|
&hdmi1_out {
|
|
hdmi1_out_con: endpoint {
|
|
remote-endpoint = <&hdmi1_con_in>;
|
|
};
|
|
};
|
|
|
|
&hdmi1_sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_receiver_cma {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_receiver {
|
|
pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&hdptxphy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdptxphy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0m2_xfer>;
|
|
status = "okay";
|
|
|
|
vdd_cpu_big0_s0: regulator@42 {
|
|
compatible = "rockchip,rk8602";
|
|
reg = <0x42>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
regulator-name = "vdd_cpu_big0_s0";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <2300>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_big1_s0: regulator@43 {
|
|
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
|
reg = <0x43>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
regulator-name = "vdd_cpu_big1_s0";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <2300>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1m2_xfer>;
|
|
status = "okay";
|
|
|
|
vdd_npu_s0: regulator@42 {
|
|
compatible = "rockchip,rk8602";
|
|
reg = <0x42>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
regulator-name = "vdd_npu_s0";
|
|
regulator-boot-on;
|
|
regulator-enable-ramp-delay = <500>;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <2300>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4m1_xfer>;
|
|
status = "okay";
|
|
|
|
usbc0: usb-typec@22 {
|
|
compatible = "fcs,fusb302";
|
|
reg = <0x22>;
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usbc0_int>;
|
|
vbus-supply = <&vbus5v0_typec>;
|
|
/*
|
|
* When the board is starting to send power-delivery messages
|
|
* too late (5 seconds according to the specification), the
|
|
* power-supply reacts with a hard-reset. That removes the
|
|
* power from VBUS for some time, which resets te whole board.
|
|
*/
|
|
status = "fail";
|
|
|
|
usb_con: connector {
|
|
compatible = "usb-c-connector";
|
|
label = "USB-C";
|
|
data-role = "dual";
|
|
/* fusb302 supports PD Rev 2.0 Ver 1.2 */
|
|
pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>;
|
|
op-sink-microwatt = <1000000>;
|
|
sink-pdos =
|
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>,
|
|
<PDO_VAR(5000, 20000, 5000)>;
|
|
source-pdos =
|
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
|
|
altmodes {
|
|
displayport {
|
|
svid = /bits/ 16 <0xff01>;
|
|
vdo = <0xffffffff>;
|
|
};
|
|
};
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
usbc0_hs: endpoint {
|
|
remote-endpoint = <&usb_host0_xhci_to_usbc0>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
usbc0_ss: endpoint {
|
|
remote-endpoint = <&usbdp_phy0_ss>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
usbc0_sbu: endpoint {
|
|
remote-endpoint = <&usbdp_phy0_sbu>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c6 {
|
|
status = "okay";
|
|
|
|
hym8563: rtc@51 {
|
|
compatible = "haoyu,hym8563";
|
|
reg = <0x51>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "hym8563";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hym8563_int>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&i2c7 {
|
|
status = "okay";
|
|
|
|
es8316: audio-codec@11 {
|
|
compatible = "everest,es8316";
|
|
reg = <0x11>;
|
|
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
|
clock-names = "mclk";
|
|
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
|
assigned-clock-rates = <12288000>;
|
|
#sound-dai-cells = <0>;
|
|
|
|
port {
|
|
es8316_p0_0: endpoint {
|
|
remote-endpoint = <&i2s0_8ch_p0_0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2s0_8ch {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s0_lrck
|
|
&i2s0_mclk
|
|
&i2s0_sclk
|
|
&i2s0_sdi0
|
|
&i2s0_sdo0>;
|
|
status = "okay";
|
|
|
|
i2s0_8ch_p0: port {
|
|
i2s0_8ch_p0_0: endpoint {
|
|
dai-format = "i2s";
|
|
mclk-fs = <256>;
|
|
remote-endpoint = <&es8316_p0_0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2s5_8ch {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2s6_8ch {
|
|
status = "okay";
|
|
};
|
|
|
|
&package_thermal {
|
|
polling-delay = <1000>;
|
|
|
|
trips {
|
|
package_fan0: package-fan0 {
|
|
temperature = <55000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
|
|
package_fan1: package-fan1 {
|
|
temperature = <65000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&package_fan0>;
|
|
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
|
};
|
|
|
|
map1 {
|
|
trip = <&package_fan1>;
|
|
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie2x1l0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie2_0_rst>;
|
|
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie2x1l2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie2_2_rst>;
|
|
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie30phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie3x4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie3_rst>;
|
|
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pd_gpu {
|
|
domain-supply = <&vdd_gpu_s0>;
|
|
};
|
|
|
|
&pd_npu {
|
|
domain-supply = <&vdd_npu_s0>;
|
|
};
|
|
|
|
&pinctrl {
|
|
hym8563 {
|
|
hym8563_int: hym8563-int {
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pcie2 {
|
|
pcie2_0_rst: pcie2-0-rst {
|
|
rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
pcie2_2_rst: pcie2-2-rst {
|
|
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pcie3 {
|
|
pcie3_rst: pcie3-rst {
|
|
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
pcie3_vcc3v3_en: pcie3-vcc3v3-en {
|
|
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
usbc0_int: usbc0-int {
|
|
rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
vbus5v0_typec_en: vbus5v0-typec-en {
|
|
rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rknn_core_0 {
|
|
npu-supply = <&vdd_npu_s0>;
|
|
sram-supply = <&vdd_npu_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rknn_core_1 {
|
|
npu-supply = <&vdd_npu_s0>;
|
|
sram-supply = <&vdd_npu_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rknn_core_2 {
|
|
npu-supply = <&vdd_npu_s0>;
|
|
sram-supply = <&vdd_npu_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rknn_mmu_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rknn_mmu_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rknn_mmu_2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&avcc_1v8_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
no-sdio;
|
|
no-sd;
|
|
non-removable;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
max-frequency = <200000000>;
|
|
no-sdio;
|
|
no-mmc;
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
|
disable-wp;
|
|
sd-uhs-sdr104;
|
|
vmmc-supply = <&vcc_3v3_s3>;
|
|
vqmmc-supply = <&vccio_sd_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sfc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&fspim2_pins>;
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <104000000>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-tx-bus-width = <1>;
|
|
vcc-supply = <&vcc_3v3_s3>;
|
|
};
|
|
};
|
|
|
|
&spi2 {
|
|
status = "okay";
|
|
assigned-clocks = <&cru CLK_SPI2>;
|
|
assigned-clock-rates = <200000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
|
num-cs = <1>;
|
|
|
|
pmic@0 {
|
|
compatible = "rockchip,rk806";
|
|
spi-max-frequency = <1000000>;
|
|
reg = <0x0>;
|
|
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
|
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
|
|
|
system-power-controller;
|
|
|
|
vcc1-supply = <&vcc5v0_sys>;
|
|
vcc2-supply = <&vcc5v0_sys>;
|
|
vcc3-supply = <&vcc5v0_sys>;
|
|
vcc4-supply = <&vcc5v0_sys>;
|
|
vcc5-supply = <&vcc5v0_sys>;
|
|
vcc6-supply = <&vcc5v0_sys>;
|
|
vcc7-supply = <&vcc5v0_sys>;
|
|
vcc8-supply = <&vcc5v0_sys>;
|
|
vcc9-supply = <&vcc5v0_sys>;
|
|
vcc10-supply = <&vcc5v0_sys>;
|
|
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
|
vcc12-supply = <&vcc5v0_sys>;
|
|
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
|
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
|
vcca-supply = <&vcc5v0_sys>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
rk806_dvs1_null: dvs1-null-pins {
|
|
pins = "gpio_pwrctrl1";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk806_dvs2_null: dvs2-null-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk806_dvs3_null: dvs3-null-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
regulators {
|
|
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_gpu_s0";
|
|
regulator-enable-ramp-delay = <400>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_cpu_lit_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_log_s0: dcdc-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <675000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_log_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <750000>;
|
|
};
|
|
};
|
|
|
|
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_vdenc_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_ddr_s0: dcdc-reg5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <675000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_ddr_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <850000>;
|
|
};
|
|
};
|
|
|
|
vdd2_ddr_s3: dcdc-reg6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vdd2_ddr_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_2v0_pldo_s3: dcdc-reg7 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_2v0_pldo_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <2000000>;
|
|
};
|
|
};
|
|
|
|
vcc_3v3_s3: dcdc-reg8 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_3v3_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vddq_ddr_s0: dcdc-reg9 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vddq_ddr_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8_s3: dcdc-reg10 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_1v8_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
avcc_1v8_s0: pldo-reg1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "avcc_1v8_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8_s0: pldo-reg2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_1v8_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
avdd_1v2_s0: pldo-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "avdd_1v2_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_3v3_s0: pldo-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vcc_3v3_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vccio_sd_s0: pldo-reg5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vccio_sd_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
pldo6_s3: pldo-reg6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "pldo6_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vdd_0v75_s3: nldo-reg1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-name = "vdd_0v75_s3";
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <750000>;
|
|
};
|
|
};
|
|
|
|
vdd_ddr_pll_s0: nldo-reg2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <850000>;
|
|
regulator-name = "vdd_ddr_pll_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <850000>;
|
|
};
|
|
};
|
|
|
|
avdd_0v75_s0: nldo-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-name = "avdd_0v75_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_0v85_s0: nldo-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <850000>;
|
|
regulator-name = "vdd_0v85_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_0v75_s0: nldo-reg5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-name = "vdd_0v75_s0";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&tsadc {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-0 = <&uart2m0_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy1_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy2_host {
|
|
/* connected to USB hub, which is powered by vcc5v0_sys */
|
|
phy-supply = <&vcc5v0_sys>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy3_host {
|
|
phy-supply = <&vcc5v0_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy0 {
|
|
mode-switch;
|
|
orientation-switch;
|
|
status = "okay";
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
usbdp_phy0_ss: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&usbc0_ss>;
|
|
};
|
|
|
|
usbdp_phy0_sbu: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&usbc0_sbu>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usbdp_phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_xhci {
|
|
usb-role-switch;
|
|
status = "okay";
|
|
|
|
port {
|
|
usb_host0_xhci_to_usbc0: endpoint {
|
|
remote-endpoint = <&usbc0_hs>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb_host1_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_xhci {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&vop {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vp0 {
|
|
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
|
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
|
remote-endpoint = <&hdmi0_in_vp0>;
|
|
};
|
|
};
|
|
|
|
&vp1 {
|
|
vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
|
|
reg = <ROCKCHIP_VOP2_EP_HDMI1>;
|
|
remote-endpoint = <&hdmi1_in_vp1>;
|
|
};
|
|
};
|