504 lines
13 KiB
C
504 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Himax HX852x(ES) Touchscreen Driver
|
|
* Copyright (c) 2020-2024 Stephan Gerhold <stephan@gerhold.net>
|
|
* Copyright (c) 2020 Jonathan Albrieux <jonathan.albrieux@gmail.com>
|
|
*
|
|
* Based on the Himax Android Driver Sample Code Ver 0.3 for HMX852xES chipset:
|
|
* Copyright (c) 2014 Himax Corporation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/input/touchscreen.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/unaligned.h>
|
|
|
|
#define HX852X_COORD_SIZE(fingers) ((fingers) * sizeof(struct hx852x_coord))
|
|
#define HX852X_WIDTH_SIZE(fingers) ALIGN(fingers, 4)
|
|
#define HX852X_BUF_SIZE(fingers) (HX852X_COORD_SIZE(fingers) + \
|
|
HX852X_WIDTH_SIZE(fingers) + \
|
|
sizeof(struct hx852x_touch_info))
|
|
|
|
#define HX852X_MAX_FINGERS 12
|
|
#define HX852X_MAX_KEY_COUNT 4
|
|
#define HX852X_MAX_BUF_SIZE HX852X_BUF_SIZE(HX852X_MAX_FINGERS)
|
|
|
|
#define HX852X_TS_SLEEP_IN 0x80
|
|
#define HX852X_TS_SLEEP_OUT 0x81
|
|
#define HX852X_TS_SENSE_OFF 0x82
|
|
#define HX852X_TS_SENSE_ON 0x83
|
|
#define HX852X_READ_ONE_EVENT 0x85
|
|
#define HX852X_READ_ALL_EVENTS 0x86
|
|
#define HX852X_READ_LATEST_EVENT 0x87
|
|
#define HX852X_CLEAR_EVENT_STACK 0x88
|
|
|
|
#define HX852X_REG_SRAM_SWITCH 0x8c
|
|
#define HX852X_REG_SRAM_ADDR 0x8b
|
|
#define HX852X_REG_FLASH_RPLACE 0x5a
|
|
|
|
#define HX852X_SRAM_SWITCH_TEST_MODE 0x14
|
|
#define HX852X_SRAM_ADDR_CONFIG 0x7000
|
|
|
|
struct hx852x {
|
|
struct i2c_client *client;
|
|
struct input_dev *input_dev;
|
|
struct touchscreen_properties props;
|
|
struct gpio_desc *reset_gpiod;
|
|
struct regulator_bulk_data supplies[2];
|
|
unsigned int max_fingers;
|
|
unsigned int keycount;
|
|
unsigned int keycodes[HX852X_MAX_KEY_COUNT];
|
|
};
|
|
|
|
struct hx852x_config {
|
|
u8 rx_num;
|
|
u8 tx_num;
|
|
u8 max_pt;
|
|
u8 padding1[3];
|
|
__be16 x_res;
|
|
__be16 y_res;
|
|
u8 padding2[2];
|
|
} __packed __aligned(4);
|
|
|
|
struct hx852x_coord {
|
|
__be16 x;
|
|
__be16 y;
|
|
} __packed __aligned(4);
|
|
|
|
struct hx852x_touch_info {
|
|
u8 finger_num;
|
|
__le16 finger_pressed;
|
|
u8 padding;
|
|
} __packed __aligned(4);
|
|
|
|
static int hx852x_i2c_read(struct hx852x *hx, u8 cmd, void *data, u16 len)
|
|
{
|
|
struct i2c_client *client = hx->client;
|
|
int error;
|
|
int ret;
|
|
|
|
struct i2c_msg msg[] = {
|
|
{
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = 1,
|
|
.buf = &cmd,
|
|
},
|
|
{
|
|
.addr = client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = len,
|
|
.buf = data,
|
|
},
|
|
};
|
|
|
|
ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
|
|
if (ret != ARRAY_SIZE(msg)) {
|
|
error = ret < 0 ? ret : -EIO;
|
|
dev_err(&client->dev, "failed to read %#x: %d\n", cmd, error);
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hx852x_power_on(struct hx852x *hx)
|
|
{
|
|
struct device *dev = &hx->client->dev;
|
|
int error;
|
|
|
|
error = regulator_bulk_enable(ARRAY_SIZE(hx->supplies), hx->supplies);
|
|
if (error) {
|
|
dev_err(dev, "failed to enable regulators: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
gpiod_set_value_cansleep(hx->reset_gpiod, 1);
|
|
msleep(20);
|
|
gpiod_set_value_cansleep(hx->reset_gpiod, 0);
|
|
msleep(50);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hx852x_start(struct hx852x *hx)
|
|
{
|
|
struct device *dev = &hx->client->dev;
|
|
int error;
|
|
|
|
error = i2c_smbus_write_byte(hx->client, HX852X_TS_SLEEP_OUT);
|
|
if (error) {
|
|
dev_err(dev, "failed to send TS_SLEEP_OUT: %d\n", error);
|
|
return error;
|
|
}
|
|
msleep(30);
|
|
|
|
error = i2c_smbus_write_byte(hx->client, HX852X_TS_SENSE_ON);
|
|
if (error) {
|
|
dev_err(dev, "failed to send TS_SENSE_ON: %d\n", error);
|
|
return error;
|
|
}
|
|
msleep(20);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hx852x_stop(struct hx852x *hx)
|
|
{
|
|
struct device *dev = &hx->client->dev;
|
|
int error;
|
|
|
|
error = i2c_smbus_write_byte(hx->client, HX852X_TS_SENSE_OFF);
|
|
if (error) {
|
|
dev_err(dev, "failed to send TS_SENSE_OFF: %d\n", error);
|
|
return error;
|
|
}
|
|
msleep(20);
|
|
|
|
error = i2c_smbus_write_byte(hx->client, HX852X_TS_SLEEP_IN);
|
|
if (error) {
|
|
dev_err(dev, "failed to send TS_SLEEP_IN: %d\n", error);
|
|
return error;
|
|
}
|
|
msleep(30);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hx852x_power_off(struct hx852x *hx)
|
|
{
|
|
struct device *dev = &hx->client->dev;
|
|
int error;
|
|
|
|
error = regulator_bulk_disable(ARRAY_SIZE(hx->supplies), hx->supplies);
|
|
if (error) {
|
|
dev_err(dev, "failed to disable regulators: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hx852x_read_config(struct hx852x *hx)
|
|
{
|
|
struct device *dev = &hx->client->dev;
|
|
struct hx852x_config conf;
|
|
int x_res, y_res;
|
|
int error, error2;
|
|
|
|
error = hx852x_power_on(hx);
|
|
if (error)
|
|
return error;
|
|
|
|
/* Sensing must be turned on briefly to load the config */
|
|
error = hx852x_start(hx);
|
|
if (error)
|
|
goto err_power_off;
|
|
|
|
error = hx852x_stop(hx);
|
|
if (error)
|
|
goto err_power_off;
|
|
|
|
error = i2c_smbus_write_byte_data(hx->client, HX852X_REG_SRAM_SWITCH,
|
|
HX852X_SRAM_SWITCH_TEST_MODE);
|
|
if (error)
|
|
goto err_power_off;
|
|
|
|
error = i2c_smbus_write_word_data(hx->client, HX852X_REG_SRAM_ADDR,
|
|
HX852X_SRAM_ADDR_CONFIG);
|
|
if (error)
|
|
goto err_test_mode;
|
|
|
|
error = hx852x_i2c_read(hx, HX852X_REG_FLASH_RPLACE, &conf, sizeof(conf));
|
|
if (error)
|
|
goto err_test_mode;
|
|
|
|
x_res = be16_to_cpu(conf.x_res);
|
|
y_res = be16_to_cpu(conf.y_res);
|
|
hx->max_fingers = (conf.max_pt & 0xf0) >> 4;
|
|
dev_dbg(dev, "x res: %u, y res: %u, max fingers: %u\n",
|
|
x_res, y_res, hx->max_fingers);
|
|
|
|
if (hx->max_fingers > HX852X_MAX_FINGERS) {
|
|
dev_err(dev, "max supported fingers: %u, found: %u\n",
|
|
HX852X_MAX_FINGERS, hx->max_fingers);
|
|
error = -EINVAL;
|
|
goto err_test_mode;
|
|
}
|
|
|
|
if (x_res && y_res) {
|
|
input_set_abs_params(hx->input_dev, ABS_MT_POSITION_X, 0, x_res - 1, 0, 0);
|
|
input_set_abs_params(hx->input_dev, ABS_MT_POSITION_Y, 0, y_res - 1, 0, 0);
|
|
}
|
|
|
|
err_test_mode:
|
|
error2 = i2c_smbus_write_byte_data(hx->client, HX852X_REG_SRAM_SWITCH, 0);
|
|
error = error ?: error2;
|
|
err_power_off:
|
|
error2 = hx852x_power_off(hx);
|
|
return error ?: error2;
|
|
}
|
|
|
|
static int hx852x_handle_events(struct hx852x *hx)
|
|
{
|
|
/*
|
|
* The event packets have variable size, depending on the amount of
|
|
* supported fingers (hx->max_fingers). They are laid out as follows:
|
|
* - struct hx852x_coord[hx->max_fingers]: Coordinates for each finger
|
|
* - u8[ALIGN(hx->max_fingers, 4)]: Touch width for each finger
|
|
* with padding for 32-bit alignment
|
|
* - struct hx852x_touch_info
|
|
*
|
|
* Load everything into a 32-bit aligned buffer so the coordinates
|
|
* can be assigned directly, without using get_unaligned_*().
|
|
*/
|
|
u8 buf[HX852X_MAX_BUF_SIZE] __aligned(4);
|
|
struct hx852x_coord *coord = (struct hx852x_coord *)buf;
|
|
u8 *width = &buf[HX852X_COORD_SIZE(hx->max_fingers)];
|
|
struct hx852x_touch_info *info = (struct hx852x_touch_info *)
|
|
&width[HX852X_WIDTH_SIZE(hx->max_fingers)];
|
|
unsigned long finger_pressed, key_pressed;
|
|
unsigned int i, x, y, w;
|
|
int error;
|
|
|
|
error = hx852x_i2c_read(hx, HX852X_READ_ALL_EVENTS, buf,
|
|
HX852X_BUF_SIZE(hx->max_fingers));
|
|
if (error)
|
|
return error;
|
|
|
|
finger_pressed = get_unaligned_le16(&info->finger_pressed);
|
|
key_pressed = finger_pressed >> HX852X_MAX_FINGERS;
|
|
|
|
/* All bits are set when no touch is detected */
|
|
if (info->finger_num == 0xff || !(info->finger_num & 0x0f))
|
|
finger_pressed = 0;
|
|
if (key_pressed == 0xf)
|
|
key_pressed = 0;
|
|
|
|
for_each_set_bit(i, &finger_pressed, hx->max_fingers) {
|
|
x = be16_to_cpu(coord[i].x);
|
|
y = be16_to_cpu(coord[i].y);
|
|
w = width[i];
|
|
|
|
input_mt_slot(hx->input_dev, i);
|
|
input_mt_report_slot_state(hx->input_dev, MT_TOOL_FINGER, 1);
|
|
touchscreen_report_pos(hx->input_dev, &hx->props, x, y, true);
|
|
input_report_abs(hx->input_dev, ABS_MT_TOUCH_MAJOR, w);
|
|
}
|
|
input_mt_sync_frame(hx->input_dev);
|
|
|
|
for (i = 0; i < hx->keycount; i++)
|
|
input_report_key(hx->input_dev, hx->keycodes[i], key_pressed & BIT(i));
|
|
|
|
input_sync(hx->input_dev);
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t hx852x_interrupt(int irq, void *ptr)
|
|
{
|
|
struct hx852x *hx = ptr;
|
|
int error;
|
|
|
|
error = hx852x_handle_events(hx);
|
|
if (error) {
|
|
dev_err_ratelimited(&hx->client->dev,
|
|
"failed to handle events: %d\n", error);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int hx852x_input_open(struct input_dev *dev)
|
|
{
|
|
struct hx852x *hx = input_get_drvdata(dev);
|
|
int error;
|
|
|
|
error = hx852x_power_on(hx);
|
|
if (error)
|
|
return error;
|
|
|
|
error = hx852x_start(hx);
|
|
if (error) {
|
|
hx852x_power_off(hx);
|
|
return error;
|
|
}
|
|
|
|
enable_irq(hx->client->irq);
|
|
return 0;
|
|
}
|
|
|
|
static void hx852x_input_close(struct input_dev *dev)
|
|
{
|
|
struct hx852x *hx = input_get_drvdata(dev);
|
|
|
|
hx852x_stop(hx);
|
|
disable_irq(hx->client->irq);
|
|
hx852x_power_off(hx);
|
|
}
|
|
|
|
static int hx852x_parse_properties(struct hx852x *hx)
|
|
{
|
|
struct device *dev = &hx->client->dev;
|
|
int error, count;
|
|
|
|
count = device_property_count_u32(dev, "linux,keycodes");
|
|
if (count == -EINVAL) {
|
|
/* Property does not exist, keycodes are optional */
|
|
return 0;
|
|
} else if (count < 0) {
|
|
dev_err(dev, "Failed to read linux,keycodes: %d\n", count);
|
|
return count;
|
|
} else if (count > HX852X_MAX_KEY_COUNT) {
|
|
dev_err(dev, "max supported keys: %u, found: %u\n",
|
|
HX852X_MAX_KEY_COUNT, hx->keycount);
|
|
return -EINVAL;
|
|
}
|
|
hx->keycount = count;
|
|
|
|
error = device_property_read_u32_array(dev, "linux,keycodes",
|
|
hx->keycodes, hx->keycount);
|
|
if (error) {
|
|
dev_err(dev, "failed to read linux,keycodes: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hx852x_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct hx852x *hx;
|
|
int error, i;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
|
|
I2C_FUNC_SMBUS_WRITE_BYTE |
|
|
I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_WRITE_WORD_DATA)) {
|
|
dev_err(dev, "not all required i2c functionality supported\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
hx = devm_kzalloc(dev, sizeof(*hx), GFP_KERNEL);
|
|
if (!hx)
|
|
return -ENOMEM;
|
|
|
|
hx->client = client;
|
|
hx->input_dev = devm_input_allocate_device(dev);
|
|
if (!hx->input_dev)
|
|
return -ENOMEM;
|
|
|
|
hx->input_dev->name = "Himax HX852x";
|
|
hx->input_dev->id.bustype = BUS_I2C;
|
|
hx->input_dev->open = hx852x_input_open;
|
|
hx->input_dev->close = hx852x_input_close;
|
|
|
|
i2c_set_clientdata(client, hx);
|
|
input_set_drvdata(hx->input_dev, hx);
|
|
|
|
hx->supplies[0].supply = "vcca";
|
|
hx->supplies[1].supply = "vccd";
|
|
error = devm_regulator_bulk_get(dev, ARRAY_SIZE(hx->supplies), hx->supplies);
|
|
if (error)
|
|
return dev_err_probe(dev, error, "failed to get regulators\n");
|
|
|
|
hx->reset_gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(hx->reset_gpiod))
|
|
return dev_err_probe(dev, PTR_ERR(hx->reset_gpiod),
|
|
"failed to get reset gpio\n");
|
|
|
|
error = devm_request_threaded_irq(dev, client->irq, NULL, hx852x_interrupt,
|
|
IRQF_ONESHOT | IRQF_NO_AUTOEN, NULL, hx);
|
|
if (error)
|
|
return dev_err_probe(dev, error, "failed to request irq %d", client->irq);
|
|
|
|
error = hx852x_read_config(hx);
|
|
if (error)
|
|
return error;
|
|
|
|
input_set_capability(hx->input_dev, EV_ABS, ABS_MT_POSITION_X);
|
|
input_set_capability(hx->input_dev, EV_ABS, ABS_MT_POSITION_Y);
|
|
input_set_abs_params(hx->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
|
|
|
|
touchscreen_parse_properties(hx->input_dev, true, &hx->props);
|
|
error = hx852x_parse_properties(hx);
|
|
if (error)
|
|
return error;
|
|
|
|
hx->input_dev->keycode = hx->keycodes;
|
|
hx->input_dev->keycodemax = hx->keycount;
|
|
hx->input_dev->keycodesize = sizeof(hx->keycodes[0]);
|
|
for (i = 0; i < hx->keycount; i++)
|
|
input_set_capability(hx->input_dev, EV_KEY, hx->keycodes[i]);
|
|
|
|
error = input_mt_init_slots(hx->input_dev, hx->max_fingers,
|
|
INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
|
|
if (error)
|
|
return dev_err_probe(dev, error, "failed to init MT slots\n");
|
|
|
|
error = input_register_device(hx->input_dev);
|
|
if (error)
|
|
return dev_err_probe(dev, error, "failed to register input device\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hx852x_suspend(struct device *dev)
|
|
{
|
|
struct hx852x *hx = dev_get_drvdata(dev);
|
|
|
|
guard(mutex)(&hx->input_dev->mutex);
|
|
|
|
if (input_device_enabled(hx->input_dev))
|
|
return hx852x_stop(hx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hx852x_resume(struct device *dev)
|
|
{
|
|
struct hx852x *hx = dev_get_drvdata(dev);
|
|
|
|
guard(mutex)(&hx->input_dev->mutex);
|
|
|
|
if (input_device_enabled(hx->input_dev))
|
|
return hx852x_start(hx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static DEFINE_SIMPLE_DEV_PM_OPS(hx852x_pm_ops, hx852x_suspend, hx852x_resume);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id hx852x_of_match[] = {
|
|
{ .compatible = "himax,hx852es" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, hx852x_of_match);
|
|
#endif
|
|
|
|
static struct i2c_driver hx852x_driver = {
|
|
.probe = hx852x_probe,
|
|
.driver = {
|
|
.name = "himax_hx852x",
|
|
.pm = pm_sleep_ptr(&hx852x_pm_ops),
|
|
.of_match_table = of_match_ptr(hx852x_of_match),
|
|
},
|
|
};
|
|
module_i2c_driver(hx852x_driver);
|
|
|
|
MODULE_DESCRIPTION("Himax HX852x(ES) Touchscreen Driver");
|
|
MODULE_AUTHOR("Jonathan Albrieux <jonathan.albrieux@gmail.com>");
|
|
MODULE_AUTHOR("Stephan Gerhold <stephan@gerhold.net>");
|
|
MODULE_LICENSE("GPL");
|