jzh/rp2040
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

[update] update gpio_led demo

Browse Source
This commit is contained in:
zhji 2025-06-02 21:06:55 +08:00
parent 59ee3ee23f
commit 35186111b8
1 changed files with 24 additions and 54 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

78
example/peripherals/gpio/gpio_led/main.c
View File

@ -1,68 +1,38 @@
#include "reset.h" #include "resets.h"
#include "clock.h" #include "timer.h"
#include "sio.h"
#include "gpio.h" #include "gpio.h"
#include "uart.h" #include "uart.h"
#include "stdio.h" #include "stdio.h"
#include "RP2040.h"
struct gpio_cfg_s gpio_led_cfg = { #define LED_PIN (25)
.pin = 25, #define LED_TIME (500 * 1000) /* 500ms */
.sio_dir = GPIO_SIO_DIR_OUT,
.funcsel = GPIO_FUNC_SIO,
.over_out = GPIO_OVER_OUT_PERIPHERAL,
.over_oe = GPIO_OVER_OE_PERIPHERAL,
.over_in = GPIO_OVER_IN_PERIPHERAL,
.over_irq = GPIO_OVER_IRQ_NORMAL,
.slew_rate = GPIO_PADS_SLEW_RATE_SLOW, /* slew rate control, slow or fast */
.schmitt = ENABLE, /* enable or disable schmitt */
.pull_down = DISABLE, /* enable or disable pull down */
.pull_up = DISABLE, /* enable or disable pull up */
.drive = GPIO_PADS_DRIVE_STRENGTH_4MA, /* drive strength */
.ie = DISABLE, /* enable or disable input */
.od = DISABLE, /* output disable, has priority over output enable from peripherals */
};
struct uart_cfg_s uart_cfg = {
.baudrate = 6 * 1000 * 1000,
.mode = UART_MODE_TX_RX,
.data_bits = UART_DATABITS_8,
.parity = UART_PARITY_NONE,
.stop_bits = UART_STOPBITS_1,
.fifo_enable = ENABLE,
.tx_fifo_level = UART_FIFO_LEVEL_1_2,
.rx_fifo_level = UART_FIFO_LEVEL_1_2,
};
extern volatile uint32_t tick_1ms;
void isr_uart0(void)
{
uint32_t status = uart_int_get_mask_status(UART_ID_0);
printf("sts = 0x%08lX\t\n", status);
}
int main(void) int main(void)
{ {
reset_enable(RESET_IO_BANK0 | RESET_PADS_BANK0 | RESET_UART0); reset_unreset_blocks_wait(RESETS_BLOCK_IO_BANK0 | RESETS_BLOCK_UART0 | RESETS_BLOCK_TIMER);
reset_disable(RESET_IO_BANK0 | RESET_PADS_BANK0 | RESET_UART0); gpio_init(0, GPIO_FUNC_UART | GPIO_PULL_UP | GPIO_DRIVE_4MA); /* UART_TX pin */
gpio_init(&gpio_led_cfg); gpio_init(1, GPIO_FUNC_UART | GPIO_PULL_UP | GPIO_SCHMITT | GPIO_PAD_IE | GPIO_PAD_OD); /* UART_RX pin */
gpio_init_simple(0, GPIO_FUNC_UART, DISABLE, ENABLE); uart_init(uart0_hw, 6 * 1000 * 1000, UART_DATABITS_8 | UART_PARITY_NONE | UART_STOPBITS_1);
printf("gpio_led example\r\n");
__enable_irq(); timer_count_write(0);
gpio_init(LED_PIN, GPIO_FUNC_NULL | GPIO_OVER_OUT_HIGH | GPIO_OVER_OE_ENABLE | GPIO_PULL_UP | GPIO_DRIVE_4MA); /* LED pin */
while (!reset_get_state(RESET_UART0));
uart_init(UART_ID_0, &uart_cfg);
uart_int_enable(UART_ID_0, UART_INT_ALL);
// NVIC_EnableIRQ(UART0_IRQ_IRQn);
while (1) { while (1) {
static uint32_t tick_led = 0; static int flag = 0;
static uint64_t tick_led = 0;
uint64_t tick_now;
if (tick_1ms > (tick_led + 500)) { tick_now = timer_count_read();
tick_led = tick_1ms; if (tick_now >= (tick_led + LED_TIME)) {
gpio_toggle(gpio_led_cfg.pin); if (flag & 1) {
printf("tick_led = %ld\r\n", tick_led); gpio_set(LED_PIN);
} else {
gpio_clear(LED_PIN);
}
flag ^= 1;
tick_led = tick_now;
printf("tick_led = %llu\r\n", tick_led);
} }
} }